English
-
English -
Русский язык
-
Português
-
Tiếng Việt
-
IndonesiaName
-
繁體中文
-
عربي
-
Français
-
ภาษาไทย
-
Español
CATEGORIES
PRODUCTS
-
Welded corrugated compensators
Welded corrugated compensator is a special type of compensator used for pipeline
Welded corrugated compensators
-
Detachable Force Transfer Joint Product Specification
For corrosive media (e.g., seawater, dilute acids), customize with 316L stainless steel body and FKM (fluororubber) seals to extend service life to 10+ years.
Detachable Force Transfer Joint Product Specification
-
External Pressure Axial Bellows Compensator
Our company mainly produces pipeline compensators, rubber expansion joints, expansion joints and other pipeline fittings.
External Pressure Axial Bellows Compensator
-
Rectangular Corrugated Expansion Joint
Our company mainly produces pipeline compensators, rubber expansion joints, expansion joints and other pipeline fittings.It only takes 15 days from order to delivery! Shipped to 50+ countries worldwide!
Rectangular Corrugated Expansion Joint
-
Limit expansion joint
Our company mainly produces pipeline compensators, rubber expansion joints, expansion joints and other pipeline fittings.It only takes 15 days from order to delivery! Shipped to 50+ countries worldwide!
Limit expansion joint
-
pipe pressure balanced bellows expansion joint
This type of compensator has two working bellows at the ends, a balancing bellows in the middle, plus tie rods and end plates. The balancing bellows has twice the effective area of the working ones. Here's the trick: the axial thrust from internal pressure in the working bellows pushes outward, but the balancing bellows pushes back in the opposite direction via the tie rods. So the thrust cancels out—no axial thrust acts on the pipeline or equipment. Instead, they only feel the stiffness reactio
pipe pressure balanced bellows expansion joint
-
DN250 Force Transfer Joint
The correct installation of DN250 force transfer joints requires balancing mechanical stress and sealing reliability, with special attention to bolt tightening sequence, limit clearance adjustment and medium compatibility. For complex working conditions (such as high pressure and high temperature), it is recommended to form a complete solution by combining with compensators, supports and other accessories to extend service life and avoid system failures.
DN250 Force Transfer Joint
-
DN1200 Detachable Force Transfer Joint Product Specification
For corrosive media (e.g., seawater, dilute acids), customize with 316L stainless steel body and FKM (fluororubber) seals to extend service life to 10+ years.
DN1200 Detachable Force Transfer Joint Product Specification
-
DN200 Force Transfer Joint
The correct installation of DN200 force transfer joints requires balancing mechanical stress and sealing reliability, with special attention to bolt tightening sequence, limit clearance adjustment and medium compatibility. For complex working conditions (such as high pressure and high temperature), it is recommended to form a complete solution by combining with compensators, supports and other accessories to extend service life and avoid system failures.
DN200 Force Transfer Joint
-
DN200 Force Transfer Joint
The DN200 force transfer joint realizes mechanical connection and thrust balance through its rigid structure, serving as a key component in pressure pipeline systems to ensure operational safety. Its design highlights the integration of force transmission efficiency and sealing reliability, with customized configurations recommended based on specific engineering conditions (e.g., medium corrosivity, temperature gradient, seismic requirements).
DN200 Force Transfer Joint
-
VSSJAFG(CF) Single Flange Force Transmission Joints
VSSJAFG(CF) Single Flange Force Transmission Joints
点击右上角
分享给朋友吧
Copyright © 2005-2015 Shengshi New Material Technology Co., Ltd.
Contact 1
